SKU: BMR-SB045H
BMR Suspension 2015-2023 S550 Mustang Sway Bar Kit, Rear, Hollow, 25mm, 3-hole Adjustable Part# BMR-SB045H
Fits 2015 - 2023 S550 Mustangs
$456.50
Usually Ships in 7-10 Days
Description
Sway Bar Kit, Rear, Hollow, 25mm, 3-hole Adjustable
Black Hammertone Finish
Fits 2015 - 2023 S550 Mustangs
DESCRIPTION
Fits S550 Mustangs- Designed for street performance, autocross, and road race applications
- Dramatically reduces body roll
- 63%-208% increase is sway bar rate over stock sway bar
- Cold formed to better resist torsional fatigue
- Manufactured from 25mm heavy-duty bar stock for increased strength
- Three-way adjustable design
- 88-durometer, greasable polyurethane bushings
- Zinc-plated inner sleeves
- Durable powdercoat finish
- 1-2-hour installation time
- Proudly designed in the U.S.A.
- Proudly made in the U.S.A.
The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension’s SB045 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty 25mm bar stock, the SB045 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB045 attaches to your S550 Mustang with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing.
BMR Suspension designed the SB045 sway bar for street performance, autocross, and road race applications. The three-way adjustable SB045 gives you a 63%-208% increase in rate over the stock bar. The rate increases gives you improved handling characteristics so you can drive harder through corners with minimal body roll. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension!
BMR Suspension’s SB045 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours.
BMR Suspension designed the SB045 sway bar for street performance, autocross, and road race applications. The three-way adjustable SB045 gives you a 63%-208% increase in rate over the stock bar. The rate increases gives you improved handling characteristics so you can drive harder through corners with minimal body roll. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension!
BMR Suspension’s SB045 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours.
Part Number BMR-SB045H
.jpg)
Features
- Fits all S550 Ford Mustangs
- On-car adjustable
- Proforged ball joint-style tie rods
- Greasable for long life and flawless operation
- 12mm/1/2-inch studs for increased strength
- 6061-T6 billet aluminum construction (front)
- Fully CNC-machined
- Heavy-duty steel hex bar stock construction (rear)
- Dramatically reduces sway bar end link deflection
- Designed to withstand high compression loads
- Allows for proper sway bar working angles and geometry on lowered S550s
- Allows for preloading of sway bars to fine-tune suspension setup
- Designed for street performance, autocross, and road race applications
- Durable black finish
- 1-hour installation time
- Proudly designed in the U.S.A.
- Proudly made in the U.S.A
Specifications
| SKU | BMR-SB045H |
| Model # | BMR-SB045H |
| Barcode # | 887753326331 |
| Brand | BMR Suspension |
| Shipping Weight | 5.0000kg |
| Shipping Width | 0.260m |
| Shipping Height | 0.130m |
| Shipping Length | 1.500m |
| Shipping Cubic | 0.050700000m3 |
Reviews
Be The First To Review This Product!
Help other American Speed users shop smarter by writing reviews for products you have purchased.
We Also Recommend
$2,980.00
BORLA® Mustang S550 GT 2015-2017 Cat-Back™ Exhaust TOURING - 2.5" - Black Tip part # 140589BC
$2,800.00
BORLA® Mustang S550 GT 2015-2017 Cat-Back™ Exhaust 'S' Type - 2.5" - Black Tip part # 140590BC
$3,095.00
BORLA® Mustang S550 GT 2015-2017 Cat-Back™ Exhaust ATAK® - 2.5" - Black Tip part # 140591BC
More From This Category
$218.90
BMR Suspension 2015-2023 S550 Mustang Rear Lower Control Arms Vertical Link, Polyurethane Part# BMR-
$539.00
